Home - News

use of galvanized iron wire?

use of galvanized iron wire?
Production process: It is processed by high-quality low-carbon steel through drawing process, pickling and rust removal, high temperature annealing, hot galvanizing and cooling. Generally, the production process of galvanized wire is wire rod--large drawing--annealing---drawing--annealing--galvanizing.
Characteristics: galvanized iron wire has good toughness and elasticity. The highest zinc content can reach 300g/m2, with galvanized layer thickness and strong corrosion resistance.
Packing: shaft wire, cut wire, U-shaped wire, etc.
Application: Galvanized wire is widely used in construction, handicrafts, wire mesh, highway fences, product packaging and daily civil use.
Galvanized wire mesh: galvanized crimped wire mesh, galvanized welded wire mesh, galvanized chain link mesh, galvanized grilled mesh, galvanized steel wire mesh, galvanized wire mesh, galvanized mine mesh, galvanized mesh, galvanized diamond Net, galvanized filter, galvanized basket, galvanized basket and so on.
choose galvanized iron wire
Check the appearance of the galvanized wire of the product process: the surface of the coating of the good process galvanized wire is continuous and practical and smooth. The equipment of the plated part is not sag, dripping or slag is present, and the surface of the plated part should be free of leakage plating. Defects such as iron. The leakage plating area is a spot size of 0.5 mm or less in diameter.
Regardless of the size of the plated part, the spotted area is 0.5-1 mm in diameter, not more than 3 points per square centimeter, and the total number of spotted spots in the plated part does not exceed 10 points.
At non-joined or non-joined corners, the height does not exceed 1.5 mm of sag dripping or slag; the plating parts are in contact with the hangers and the handling objects, but no iron.
Check the zinc adhesion and zinc layer thickness of the process galvanized wire: When the thickness of the galvanized wire and the plated part is 3-4 mm, the zinc adhesion should be less than 460 g/m, that is, the uniform thickness of the zinc layer is not lower than 65 microns;
Customer for the purpose, to satisfy every customer's pre-sales and after-sales service needs
Market-oriented, seeking and respecting every reality and potential customer
Factory management as the core, increase sales and market share and coverage
The new development is based on the standardization, serialization of the perfect design, product technology and continuous innovation. 

we are provide electro galvanized wire,we can guarantee quality.electro galvanized wire

Online Service×