hot dipped galvanized wire rope

Hot-dip galvanizing, as the name suggests, is plating in the case of warming. After melting the zinc into a liquid state, the base material is immersed therein, so that the zinc will interpenetrate with the base material, and the bonding is very tight, and other impurities or defects are not easily left in the middle, similar to the melting of the two materials in the plating portion, Moreover, the thickness of the coating is large, it can reach 100 microns, so the corrosion resistance is high, the salt spray test is no problem for 96 hours, which is equivalent to 10 years in the normal environment; and the cold galvanizing is carried out at normal temperature, the process is not mentioned, although It is also possible to control the thickness of the plating layer, but the bonding strength and thickness of the plating layer are relatively low, so the corrosion resistance is poor.we are provide hot dipped galvanized wire rope,you can know it.we can guarantee the quality of hot dipped galvanized wire rope.
The construction of the inner wall of the construction project wall can effectively solve the cracks on the wall surface, fall off, and the phenomenon of empty drums.
The popular trend, hot-dip galvanized steel wire mesh has also been unanimously recognized by everyone.
Requirements for hot-dip galvanized steel wire mesh materials: the smoothness, width and length of the mesh surface must meet the standards, welding process, weight, and amount of zinc required for the project. It has many production operations, complete inspection certificates, good quality and price. excellent.
Before the plastering of the wall, the construction of the steel mesh with the gap between the wall and the column can play a certain role of strengthening and heat preservation. The mesh is hung on the interface surface of different base layers, and the length of each side should meet 100mm to prevent shrinkage cracking caused by different base layers. Different base level junctions refer to the junction of masonry walls and columns and beams.
The mesh is 1/2 inch, the mesh is between 0.35-0.9 (0.9 is the national standard), the wire diameter of the mesh can also determine the effect and efficiency of the construction. The mesh is easy to lay and soft, and the construction efficiency is high; the national standard can guarantee Quality, but the laying is not as fast as the fine construction. (When laying the steel mesh, it is laid out according to the laying method from the middle to the two sides).
The wall plastering works generally use two kinds of steel wire mesh materials: one is electroplating (also called wire drawing), and the other is hot-dip galvanizing. The former has a low cost range, and the cost of hot-dip galvanizing material is slightly higher than that of electroplating. The cost is high and the life is good to prevent rust [in the end, according to the needs of the project].
Our factory adheres to the business philosophy of "customer-centered, low-cost and high-quality, quality service as the means, customer satisfaction as the goal", we are convinced that each product is an advertisement, and we are at an absolute price. With advanced technology and perfect after-sales service to win the trust of users, we sincerely hope to cooperate and communicate with new and old customers.

The general manager and all the staff sincerely welcome customers to negotiate business, and is willing to work with customers to create a better tomorrow!