Knowledge points that need to be paid attention to during galvanizing of galvanized iron wire
Zinc-plated wire is still in the life of industrial production, and can be seen everywhere. Due to the different processing methods of galvanized wire, its characteristics and scale of use are also different.
In the meantime, the galvanized wire is a metal product with a relatively large scale. The function of the galvanized wire in the production process, the resolution of the product quality of the galvanized iron wire
Galvanized wire is in the galvanizing process. The resistance of galvanized wire is 15 to 25 percent higher than that of galvanizing, and in a single case it is even higher than the resistance of light wire. The galvanized wire which is firstly plated and pulled out has a higher strength limit than that of the first galvanized wire. The galvanized wire which is plated with zinc and then drawn is not only resistant but also has high strength and high strength.
There is a relatively low number in the strength limit of the drawn galvanized iron wire, which is due to the reason of zinc, because the strength of zinc is several times smaller than the wire itself. It is necessary to change the hot-dip galvanizing process of galvanizing wire. For the finer and finer galvanized wire, it is impossible to plate the lubricating zinc layer of the required thickness.
The fine galvanized wire is short and small, and the outer surface is relatively large, so that the degree of erosion is greater, but the plating quality is particularly thin.
If the zinc is first plated and then pulled out, the galvanized wire of the product can be adjusted. The purpose of galvanizing is to make the galvanized wire product function more and more excellent. Together, in order to achieve this intention, the galvanized layer can be more uniform in the later stage, and the quality of the galvanized iron wire is more uniform.