News
Home - News

Hot-dip galvanizing wire application methods and precautions

(1)Application method: 1 should reasonably select the orientation of the pull on the goods. When it is used to avoid horizontal movement of the goods, the pulling direction should be as low as possible; when it is used to avoid the product being overturned, the pulling direction can be appropriately higher.
2 The method of using galvanized iron wire [1] to pull the reinforcement mainly includes: eight-shaped shape, inverted eight-shaped shape, cross, zigzag or reverse shape. Various pulling methods can be used alone or in combination of two or more. Pulling should be symmetrical.
3 When pulling and strengthening, single or double-strand galvanized iron wire is reciprocated around the two knots of the goods and the vehicle, and the galvanized iron wire should be tightened so that the tightness of each strand is as common as possible, and some crossover surrounds the rope. Use a skein to tighten and the remaining tails toward the inside of the car.we provide galvanized iron wire and electro galvanized wire,you can know it.
(2)Note:
1 Do not damage the galvanized iron wire when tightened.
2 to stop the use of two or more galvanized iron wire one-time surround operation.
The diameter of the galvanized iron wire for pulling 3 shall not be less than 4 mm, and the diameter of the galvanized iron wire for binding shall not be less than 2.6 mm.
4 galvanized iron wire shall not be used as a waist-reduction type reinforcement, and is usually not used as an integral bond. The galvanized wire in the warehouse is mainly used to block and distinguish the regional functions. The galvanized wire in the warehouse is one of the primary ways to use galvanized wire. The main layout features of the galvanized wire in the warehouse are as follows:
Layout mode: column + net frame, the column is made of square steel pipe, the frame of galvanized wire is also made of small square tube. The column and frame are welded to the joint ear (flat iron), column and The frame is fixed by bolts on the coupling lugs, and the bottom of the column is welded to the bottom plate. The bottom plate of the column is fixed to the ground through expansion bolts.

In the fierce market competition, all employees of the company have won high praise and recognition from customers with a high degree of professionalism and good service attitude. All employees of our company are willing to provide high quality products and services to domestic and foreign customers with good reputation and superb technology.

galvanized iron wire and electro galvanized wire


HOT PRODUCT
Online Service×